HC-700 M/G Software Download: How to Set Up and Use Your Trail Camera
If you are looking for a reliable and affordable trail camera that can send photos and videos to your email or phone, you might want to consider the HC-700 M/G model from Suntek. This camera has a 16MP resolution, a 0.5s trigger speed, a 20m flash range, and a built-in 2.0" TFT color screen. It also supports 2G (GSM) or 3G (WCDMA) network, depending on the version you choose.
However, before you can enjoy the features of this camera, you need to download and install the software that allows you to configure the camera settings and send photos via SMTP protocol. In this article, we will show you how to do that step by step. We will also give you some tips on how to set up and use your HC-700 M/G trail camera effectively.
hc-700 m g software download
Introduction
What is HC-700 M/G trail camera?
The HC-700 M/G trail camera is a digital device that can capture images and videos of wildlife or other subjects in remote areas. It has a motion sensor that detects any movement within its detection range and triggers the camera to take a photo or record a video. The camera can also send the photo or video to your email or phone via 2G or 3G network, depending on the version you have.
The HC-700 M/G trail camera has several features that make it suitable for various applications, such as hunting, wildlife observation, security surveillance, farm monitoring, etc. Some of these features are:
Built-in 2.0" TFT color screen to review photos and videos on camera
32pcs IR LEDs for flash range as 20 meters
Programmable 8/12/16 Megapixel high-quality resolution
Color pictures during daylight; black and white at night
Adjustable PIR sensitivity; HIGH, MID, LOW
Impressive quick trigger time: 0.5s
Multi-shot pictures; 1, 3, 6, 9
Adjustable delay between motions; 1/5/10/30 seconds/minutes
Adjustable video length; 10/30/60/90 seconds
With 8 AA alkaline batteries, the longest standby time is up to 6 months
Available operation temperature: -30 to 50
With specified timer, camera can be programmed to work only during preset time period every day
Stamp of date, time, temperature and moon phase on every picture
Password protection
Supports SD card up to 64GB
Waterproof IP54
Why do you need to download the software?
The HC-700 M/G trail camera comes with a CD that contains a free program called MMSConfig. This program allows you to configure the camera settings and send photos via SMTP protocol. SMTP stands for Simple Mail Transfer Protocol, which is a standard method of sending emails over the internet. By using SMTP, you can send photos to your email or phone without using a third-party service or app. This can save you time and money, and also protect your privacy and security.
How to download and install the software?
To download and install the software for your HC-700 M/G trail camera, you need to follow these steps:
Insert the CD that came with your camera into your PC's CD drive. If you don't have a CD drive, you can download the software from [this link](^1^).
Open the CD folder and find the file named MMSConfig.exe. Double-click on it to run the program.
Follow the instructions on the screen to install the software on your PC. You may need to restart your PC after the installation is complete.
Launch the MMSConfig program from your desktop or start menu. You will see a window like this:
This is the main interface of the software, where you can configure the camera settings and send photos via SMTP protocol. We will explain how to use it in the next section.
How to Set Up Your HC-700 M/G Trail Camera
Inserting the SIM card, SD card, and batteries
Before you can use your HC-700 M/G trail camera, you need to insert a SIM card, an SD card, and batteries into it. Here is how to do it:
Open the bottom cover of the camera by sliding it downwards. You will see three slots: one for the SIM card, one for the SD card, and one for the batteries.
Insert a SIM card that supports 2G (GSM) or 3G (WCDMA) network, depending on the version of your camera. Make sure the SIM card has enough balance and data traffic service. The SIM card slot is located on the left side of the camera, next to the USB port. Push the SIM card into the slot until it clicks into place.
Insert an SD card (up to 64GB) that stores the photos and videos captured by the camera. The SD card slot is located on the right side of the camera, next to the power switch. Push the SD card into the slot until it clicks into place.
Insert eight AA batteries that power the camera. The battery slot is located at the bottom of the camera, under a plastic cover. Open the cover by pressing on both sides and lifting it up. Insert the batteries according to the polarity marks (+ and -) inside the slot. Close the cover by pressing it down until it clicks into place.
Close the bottom cover of the camera by sliding it upwards until it locks securely.
Connecting the camera to your PC
To configure the camera settings and send photos via SMTP protocol, you need to connect your camera to your PC with a USB cable. Here is how to do it:
Turn off your camera by sliding the power switch to OFF position.
Connect one end of the USB cable to your camera's USB port, which is located on the left side of the camera, next to the SIM card slot.
Connect the other end of the USB cable to your PC's USB port.
Turn on your camera by sliding the power switch to SETUP position. The camera will enter the setup mode and display the menu on the screen.
Launch the MMSConfig program on your PC. The program will automatically detect your camera and show its information on the window.
Configuring the camera settings with MMSConfig
Once you have connected your camera to your PC, you can use the MMSConfig program to configure the camera settings and send photos via SMTP protocol. Here is how to do it:
Select the COM port that corresponds to your camera from the drop-down list at the top of the window. If you are not sure which port to choose, you can click on the Auto Search button and let the program find it for you.
Click on the Read From Camera button to read the current settings of your camera and display them on the window. You can also click on the Default button to load the default settings of your camera.
Modify the settings according to your preferences and needs. You can change the parameters such as image size, video size, video length, PIR sensitivity, time lapse, timer, etc. You can also enter your email address and phone number that will receive the photos from your camera.
Click on the SMTP button to enter the SMTP settings that will enable your camera to send photos via email. You need to enter the SMTP server address, port number, user name, password, sender address, and receiver address for your email account. You can also choose whether to use SSL encryption or not. If you are not sure about these settings, you can consult your email provider or search online for some examples.
Click on the Write To Camera button to save the settings to your camera. You will see a message that says "Write OK" if the operation is successful.
Testing the camera and sending photos to your email or phone
After you have configured the camera settings with MMSConfig, you can test the camera and see if it can send photos to your email or phone. Here is how to do it:
Disconnect your camera from your PC and remove the USB cable.
Press any button on your camera to exit the setup mode and enter the preview mode. You will see a live view of what your camera sees on the screen.
Press OK button to take a photo manually. The photo will be saved on your SD card and also sent to your email or phone via SMTP protocol.
Check your email or phone and see if you have received the photo from your camera. If yes, congratulations! You have successfully set up your HC-700 M/G trail camera. If not, you may need to check your network signal, SIM card balance, SMTP settings, or contact customer service for help.
How to Use Your HC-700 M/G Trail Camera
Choosing a suitable location for your camera
To get the best results from your HC-700 M/G trail camera, you need to choose a suitable location for it. Here are some tips on how to do it:
Choose a location that has frequent animal activity or human traffic, depending on what you want to capture with your camera.
Avoid placing your camera facing directly into the sun, as this may cause overexposure or glare in your photos and videos.
Avoid placing your camera near sources of heat or light, such as fireplaces, lamps, or heaters, as this may trigger false alarms or reduce battery life.
Avoid placing your camera in areas with high humidity or moisture, such as swamps, rivers, or ponds, as this may damage your camera or affect its performance.
Avoid placing your camera in areas with strong electromagnetic interference, such as power lines, radio towers, or cell phone towers, as this may affect the network signal or the camera function.
Mounting the camera securely and adjusting the angle
After you have chosen a suitable location for your camera, you need to mount it securely and adjust the angle. Here are some tips on how to do it:
Use the strap that came with your camera to attach it to a tree, a pole, or a wall. Make sure the strap is tight and the camera is stable.
Alternatively, you can use the tripod socket at the bottom of the camera to mount it on a tripod or a screw-in bracket. Make sure the tripod or the bracket is sturdy and can support the weight of the camera.
Adjust the angle of the camera so that it covers the area you want to monitor. You can use the screen on the camera to check the view and make fine adjustments.
Make sure the camera lens and the PIR sensor are not blocked by any branches, leaves, or other objects. Also, make sure there is enough distance between the camera and the subject, at least 1.5 meters.
Lock the bottom cover of the camera with a padlock (not included) to prevent unauthorized access or theft.
Switching the camera to ON mode and checking the signal strength
Once you have mounted your camera and adjusted the angle, you need to switch it to ON mode and check the signal strength. Here is how to do it:
Slide the power switch to ON position. The camera will enter the working mode and start taking photos or videos when it detects any motion.
Check the signal strength indicator on the screen. It shows how strong the network signal is in your location. The more bars, the better. If there is no signal or weak signal, you may need to relocate your camera or change your SIM card.
Check the battery level indicator on the screen. It shows how much power is left in your batteries. The more bars, the better. If there is low battery or no battery, you need to replace your batteries as soon as possible.
Viewing and managing the photos and videos on your device or PC
The HC-700 M/G trail camera can send photos and videos to your email or phone via SMTP protocol. You can also view and manage them on your device or PC. Here are some tips on how to do it:
To view the photos and videos on your device, you need to open your email app or SMS app and find the messages from your camera. You can download or delete them as you wish.
To view and manage the photos and videos on your PC, you need to connect your camera to your PC with a USB cable or insert your SD card into a card reader. You can copy, delete, edit, or share them as you wish.
You can also use some software programs to view and manage your photos and videos more conveniently. For example, you can use [this link] to download a free program called SuntekCam that allows you to view, download, delete, rename, or share your photos and videos from your PC.
Conclusion
The HC-700 M/G trail camera is a great device that can help you capture amazing images and videos of wildlife or other subjects in remote areas. It can also send them to your email or phone via SMTP protocol, which is convenient and secure. However, before you can enjoy these features, you need to download and install the software that allows you to configure the camera settings and send photos via email. In this article, we have shown you how to do that step by step. We have also given you some tips on how to set up and use your HC-700 M/G trail camera effectively. We hope you have found this article helpful and informative. If you have any questions or feedback, please feel free to contact us or leave a comment below. Thank you for reading and happy hunting!
FAQs
Here are some frequently asked questions and answers about the HC-700 M/G trail camera and the software download:
Q: What is the difference between the HC-700 M and the HC-700 G?
A: The HC-700 M supports 2G (GSM) network, while the HC-700 G supports 3G (WCDMA) network. Depending on your location and network availability, you may choose the version that suits you better.
Q: How can I update the firmware of my camera?
A: You can download the latest firmware from [this link] and copy it to your SD card. Then, insert the SD card into your camera and turn it on. The camera will automatically detect the firmware file and update itself. You will see a message that says "Update OK" if the operation is successful.
Q: How can I reset my camera to factory settings?
A: You can reset your camera to factory settings by pressing the MENU button and then the UP button for 5 seconds. You will see a message that says "Reset OK" if the operation is successful.
Q: How can I troubleshoot some common problems with my camera?
A: You can refer to the user manual or [this link] for some solutions to common problems with your camera, such as no signal, no photo, low battery, etc.
Q: How can I contact customer service or get more information about my camera?
A: You can contact customer service by email at suntekcam@hotmail.com or by phone at +86 755 28347835. You can also visit [this link] for more information about your camera, such as specifications, features, videos, etc. 44f88ac181
Comentários